|
 |
|
Gripflow®
Features: |
||
| |
||||
| True square edges with a full bearing surface. The edges are parallel to each other and perpendicular to the top and bottom surfaces. | ||||
| Normal edge finish 32 RMS. | ||||
| Part to part repeatability is excellent. | ||||
| Tolerances to 0.0005" and flatness to 0.001" per linear inch. | ||||
| Small hole
diameters can be pierced --- as small as 40% of the material thickness. |
||||
| Holes can
be close to the edge --- the web can be 40% the material thickness. |
||||
| Eliminate many secondary operations: drilling, reaming, countersinking, counterboring, milling, broaching, shaving and flattening. | ||||
| One
stamping station can include: piercing, coining, embossing, lancing, bending and blanking. |
||||
Gripflow®
Costs: |
||||
| The costs
of GRIP flow®
parts are considerably less expensive than conventional stampings that require secondary operations or Fineblank stampings. |
||||
| The most advanced machining techniques, including CNC machining, cannot compete with GRIP flow® production rates, part accuracy or quality. | ||||
| Tooling
cost for GRIP
flow®
stamping dies can be
10% to 30% less than conventional stamping dies. These savings are a result
of the specialized die-making procedures and equipment developed by EBway Corporation. |
||||
| Tooling cost
for GRIP flow®
stamping dies can be 20% to 50% less than Fineblank stamping dies. |
||||
|
EBway
CORPORATION In the event our
normal communications are not operational please call our emergency
Tel. 954-678-0699. |
||||
 |
